Lifting and Printing
-
Backing Bunker™
Backing Bunker - Finally, a problem solved for every Latent Print Officer! Retired Lt./CSI Joe Siefferman had this problem…and admit it, you do too. His “fresh” Backing Cards were always getting dusty with fingerprint powder, and it was a hassle to pull out one backing card at a time, especially while wearing gloves. He developed and created a refillable “card shoe” similar to a card dealer in Vegas. Fits within a pocket, BDU cargo or in a kit. He likes to tap it slightly to bring a fresh, clean card to the surface every time. A real dispensing time saver!$16.99 Add to cart -
BlackMagic Fingerprint Ink Pads
BlackMagic Fingerprint Ink Pads, otherwise referred to as the "Universal Ink Pads" will certainly make quite an impression on you! They are universal in the sense that they replace all other fingerprint pads on the market including the roller and slab method, Porelon and the old ink (which we sell as well). Simply touch your fingerprint on the surface of the BlackMagic pad, then roll the print for a jet-black, crisp clear image that instantly dries. Rub your fingers together...and Poof! the ink wipes off. Dimensions listed are inking surface.Select options -
BlackMagic Ceramic Fingerprint Ink Pads
Simply touch your fingerprint on the surface of the BlackMagic Ceramic Fingerprint Ink Pad, then roll the print for a jet-black, crisp clear image that instantly dries. Dimensions listed are inking surface.Select options -
4 in. Fingerprint Ink Roller
Our Fingerprint Ink Roller is composed of a medium soft rubber for optimum ink distribution.$21.47 Add to cart -
Steel Print Ink Slab 5 in. x 10 in.
Steel Print Ink Slabs are ideal surfaces for rolling out smooth and even coats of ink and include two holes for mounting to counter tops.$14.56 Add to cart -
Fingerprint Cards 100 Count
These fingerprint and palmprint cards use the standard format found in most areas of the world. They are printed on 110 lb. paper stock that has a brilliant white finish and fast ink absorption.Select options -
Fingerprint Ink Cleaner
Fingerprint Ink Cleaner is an all-natural, waterless hand cleaner that will remove ink from hands, rollers and slabs without rinsing. Simply apply a small amount and wipe off with a paper towel.$11.28 Add to cart -
Fingerprint Ink Towelettes 100 Count
Don't just smear the ink around, cut through the ink instantly. Use Fingerprint Ink Towelettes to remove fingerprint ink from hands, slabs, etc.$14.00 Add to cart -
Fingerprint Ink
Fingerprint Ink is black as coal and smooth as silk, the quick dry formula provides excellent ridge detail.Select options -
Pre-Inked Fingerprint Slabs
Our pre-inked fingerprint slabs have a thin even coat of fingerprint ink between two pieces of polyester film. Just peel the film surfaces apart and you have two perfectly inked slabs ready for dozens of rolled prints.Select options -
Pre-Print Towelettes 100 count
Eliminate poor quality fingerprints caused by excessive moisture on the fingers, or by dry, hard, or callused fingers. Pre-Print Towelettes accentuate the ridge lines of the fingers for better fingerprint reproduction.$14.00 Add to cart -
Glass Printing Ink Slab 5 in. x 12 in.
Glass Printing Ink Slabs are ideal surfaces for rolling out smooth and even coats of ink and include two holes for mounting to counter tops.$13.53 Add to cart -
Porelon Desk/Pocket Fingerprint Pad
With Table-Top and Pocket Fingerprint Porelon Pads, you don't need tubes of ink, rollers or slabs. Simply place the fingertips on the pre-inked touch pad and print. Each pad has nearly a two year supply of ink. These refill pads are non-fading, quick drying, and FBI approved. Compact Porelon Desk/Pocket Fingerprint Pad can either be mounted on your desk with handy adhesives or carried with you.Select options -
Oop’s Tabs 250 Count
Sized to fit within the boxes on most standard fingerprint cards, Oop's Tabs are ideal for covering up a mistake in fingerprinting.$15.30 Add to cart -
Perfect Ink Fingerprint Pads
Perfect Ink Fingerprint Pads will not dry out when left unused. Ink pads feature a slight residue left on hands that is easily removed by rubbing them together or wiping with a towel. Hard ceramic inking surface to prevent over-inking fingers.Select options -
Stationary/Portable Fingerprint Cardholder
The Stationary/Portable Fingerprint Cardholder is the essential tool for taking prints is convenient and so well made that it will last for years.$33.70 Add to cart -
Digit 10 Inkless Fingerprint Pad 3″ x 4.5″
This replacement compact Digit 10 Inkless Fingerprint Pad, for use with the Digit 10 Inkless Fingerprinting System, is a recessed fingerpad which will produce 10,000 individual prints. This unique formulation produces permanent black prints on any fingerprint card and is great for high-volume printing.$81.50 Add to cart -
Latent Print Reference Pad
Latent print reference pads create perfect, consistent test latent fingerprints again and again. Simply press your finger on the desired pad and the perfect amount of latent print residue is left behind. Latent print development techniques can then be accurately tested and gauged based on this reference standard, regardless of who placed the print.Select options -
Fingerprint Station with One Cardholder and Slab
This fingerprint station is designed to provide the proper height for rolling prints when placed on a desk or table. This kits includes a mounted cardholder, slab, roller and ink. 27.5" x 16" x 6"$266.24 Add to cart -
Fingerprinting Station with Two Cardholders
The Fingerprinting Station consists of an easily replaceable Black Magic Ink Pad and two cardholders attached to a durable base. These units produce permanent, black, non-smearing fingerprints on any paper. 26" x 6"Select options -
Fingerprinting Station with Two Cardholders and Folding Legs
The Fingerprinting Station consists of an easily replaceable Black Magic Ink pad and two cardholders, attached to a durable platform which has folding legs. These units produce permanent, black, non-smearing fingerprints on any paper. 26" x 6" x 6"$266.24 Add to cart -
Portable Fingerprint Kit with Portable Station
Portable Fingerprint Kit includes a portable fingerprinting station, box of Retabs, and 100 individually-packaged Pre-Print wipes in a foam lined, durable, black plastic case.Select options -
Portable Fingerprinting Station
Portable Fingerprinting Station consists of an easily replaceable Black Magic Ink pad and a cardholder, attached to a durable platform. These units produce permanent, black, non-smearing fingerprints on any paper. 16.75" x 6"$124.57 Add to cart -
Portable Fingerprinting Station with Folding Legs
Portable Fingerprinting Station with Folding Legs consists of an easily replaceable Black Magic Ink pad and a cardholder, attached to a durable platform. These units produce permanent, black, non-smearing fingerprints on any paper. 16" x 6" x 6"$165.35 Add to cart -
CSIpix Matcher
Select optionsCSIpix® Matcher is a powerful new tool based on the CSIpix® Comparator. The Matcher can be used to perform an in-depth automated comparison between a latent fingerprint and a tenprint card or between a latent and a known palmprint.The Matcher assists examiners with the comparison of a latent print to a known print by highlighting regions on the known tenprint or palm that match the features of the latent print. The latent print is also rotated appropriately so it lines up with the matching region of the known print. In many cases only one region is highlighted, so the examiner can quickly exclude non-matches or begin work on the detailed comparison.The Matcher can be especially useful when a latent print (finger or palm) is of poor quality with few minutiae and small area. It can save significant time when comparing a partial latent palmprint to the relatively large area of a known palmprint. In cases where a latent fingerprint is poor quality with few minutiae and/or a small usable area, more than one matching region may be highlighted. In this case non-matching regions can typically be eliminated quickly.Features:- New Feature - Minutia detection will run on any resolution image if >= 300 DPI & <= 2000 DPI
- New Feature - Minutia pattern matching will run on any resolution image if >= 300 DPI & <= 2000 DPI
- New Feature - Ridge tracing
- New Feature - Polynomial Regional of Interest (ROI) for Enhance functions
- New Feature - Edge blending for Enhance
- Search a latent fingerprint with as few as 4 points against multiple prints on a tenprint
- Search a latent palm print with as few as 4 points against an entire known palm
- Automated minutiae detection for entire palm or tenprint
- Automated Matcher algorithm to detect regions on known that match latent feature pattern
- Save minutiae data for latent and known prints for fast processing
- Manual minutiae addition and editing, optional addition of cores/deltas
- Highlighted regions indicate matching feature pairs with bright dots and connecting lines
- Automated rotation of latent print to match orientation of matching region of known print
- Includes all features of CSIpix® Comparator
-
CSIpix Comparator
Comparison software that will enable you to compare prints like the big boys do! Completely PC driven. No need for additional hardware. Intuitive enough to call this "simple to figure out." Affordable for anyone to justify. Scan 10-print images. Scan latent images. On screen, open the images for comparison and see them side by side in the same magnification. One-click functions like auto scaling, auto contrast, and gray-scale optimization help speed the comparison. A full complement of annotation features lets you put in circles, dots, arrows, minutia symbols, labels and more. (Makes for a professional courtroom exhibit presentation either in print or a slideshow.) New Features:Select options- Ridge tracing
- Polynomial Regional of Interest (ROI) for Enhance functions
- Edge blending for Enhance
-
Scribes and Ridge Counters
Scribes and Ridge Counters are the perfect tools for identifying matches. The 5 Piece Counter set has a variety of scribes and ridges for any occasion and comes with a case. The pocket one is a great companion for any shirt pocket. With the needlepoint, you won't be making afghans with this, but you will be determining the finer points of a print. And the retractable ones work just like a ballpoint pen!Select options -
Post Mortem Kit
The Post Mortem Kit contains everything necessary for fingerprinting the deceased, bed patients or those with crippled hands. Includes a BlackMagic Ink Pad; 50 right-hand card strips; 50 left-hand card strips; 12 ink-cleaner towelettes; and one post-mortem cardstrip holder.$50.70 Add to cart -
Post-Mortem Spoon
Post-Mortem Spoon is a metal "spoon" that holds fingerprint cards to assist in the collection of fingerprints.$24.50 Add to cart -
Post-Mortem Cards
Post-Mortem Cards consist of 50 right-hand card strips and 50 left-hand card strips.$17.62 Add to cart -
Backing Cards
Use Backing Cards to mount your lifts. Complete with all documentation and crime scene sketch areas, the cards are printed on extra heavy 8-point stock and feature a glossy white or black side for mounting your lifts.Select options -
ScaleLift Backing Cards
This glossy ScaleLift Backing Card comes with the bonus of a ruler (in metric and inches) on the latent print side of the card. Helps ensure complete accuracy when scanning latent prints into the computer system.Select options -
DIFF-Lift Lifting Tape
DIFF-Lift Lifting Tape is 20 times thicker than standard lifting tape and molds itself to textured surfaces. Use on vinyl car dashes, pebble-grained leather, textured plastics, metals, paper, and wood.Select options -
Lifting Tape
Our lifting tapes offer uniform adhesion, proper clarity, and no streaks or air bubbles. The clear tape is crystal clear.Select options -
Polyethylene Lifting Tape
Polyethylene Lifting Tape is ideal for lifting prints from curved surfaces like door knobs, light bulbs, etc. Strong but elastic, this tape film is very adaptable to textured, convex, or concave surfaces. The tape is crystal clear.Select options -
Clear Peel-N-Lift Tab On A Roll
Clear Peel-N-Lift Tab On a Roll are pre-cut, pre-scored, extra easy-to-use fingerprint lifters in a convenient one-at-a-time dispenser roll.Select options -
Flap Lifter with Backing Flap
Simply peel the protective backing sheet of Flap Lifters to expose a clear sticky back lifting tab, then place the tab on the powdered print, lift it, and fold down on the pre-attached backing card flap. The backing card flaps are made from heavy duty black, white, or clear vinyl, and come permanently attached to the flap lifter.Select options -
Scaled Flap Lifters
Our same great Flap Lifters are now available with a small scale printed for instant (and better) documentation to measure size and relative spatial positioning.Select options -
Clear PocketPads Lifting Tape
Soft, yet beefy, our Clear PocketPads lifting tape have a get the job done attitude. For use just like regular lifting tape, you'll have no problem capturing the best prints available.Select options -
Lifting Tape Dispenser
Our Stainless Steel tape dispenser provides a convenient way to avoid getting your own prints on the tape while holding, dispensing, and cutting our variety of lifting tape sizes. The built in sharp serrated cutting blades make a fast, clean cut every time. Available in three sizes to accommodate all of our lifting tapes. Size listed is the size of lifting tape each dispenser holds.Select options -
Scaled Peel-N-Lift without Backing Flap
With Scaled Peel-N-Lift, simply peel the protective backing sheet to expose a clear sticky back lifting tab, then place the tab on the powdered print, lift it, and mount to backing card.Select options -
Peel-N-Lift without Backing Flap
With Peel-N-Lift, simply peel the protective backing sheet to expose a clear sticky back lifting tab, then place the tab on the powdered print, lift it, and mount to backing card.Select options -
Gel Print Lifters
Gel Lifters consist of a thin film of sensitive gelatin on a backing sheet. The gelatin surface is excellent for picking up powdered latent prints, shoe impressions, etc. Simply cut to size with scissors. Available in black, white, or transparentSelect options -
Latent Lifters/Trace Evidence Lifters
These lifters can be used for collecting latent finger and palm prints, footprint residue and trace evidence found at crime scenes. Simply peel off the inside liner and place adhesive down. After lifting, affix backing sheet to evidence lifted.Select options -
ProLift
Our ProLift is an all inclusive setup allowing you to lift your print and have the backing card already there. Available in black or white.Select options
